Search
Latest topics
My 1990 318is is knocking at the back
4 posters
Page 1 of 1
My 1990 318is is knocking at the back
Hello forum
I have not had my 318 long but it has always knocked when i have accelerated hard at the back, im worried that it might be my diff unit. The persom oi brought it from failed to mention it...
any ideas?
I have not had my 318 long but it has always knocked when i have accelerated hard at the back, im worried that it might be my diff unit. The persom oi brought it from failed to mention it...
any ideas?
slinky- Moderator
- Posts : 135
Join date : 2009-04-30
Re: My 1990 318is is knocking at the back
Hi there,
The knock you are getting could be a number of things but I would take a closer look at the Diff mounts, these are known to cause the symptoms you are getting.
Do you get any knocks when going over bumps at all?
Also worth checking the rubber bush between the diff and prop shaft.
The knock you are getting could be a number of things but I would take a closer look at the Diff mounts, these are known to cause the symptoms you are getting.
Do you get any knocks when going over bumps at all?
Also worth checking the rubber bush between the diff and prop shaft.
Spartan- Moderator
- Posts : 44
Join date : 2009-04-30
Location : UK
Re: My 1990 318is is knocking at the back
I second that.
Dont immediately assume the worst. chances are it is just a bush somewhere...
mightybmw(admin)
Dont immediately assume the worst. chances are it is just a bush somewhere...
mightybmw(admin)
Re: My 1990 318is is knocking at the back
i do get a thud when i reverse up my drive which is on a bit of a hill. my car handles ok which is what confuses me a bit. will the diff be move if the mounts are gone? i will have to have a look at it.
slinky- Moderator
- Posts : 135
Join date : 2009-04-30
Re: My 1990 318is is knocking at the back
Sounds like you do have a problem with the diff mounts. If they are split then, they will cause the diff to move and that's probably the thud you are getting.
But you do need to get the car up in the air and take a look mate.
If you want to be cheeky and cant be bothered, take it down to your local Kwik fit and getb them to check it out and advise you....................its free
But you do need to get the car up in the air and take a look mate.
If you want to be cheeky and cant be bothered, take it down to your local Kwik fit and getb them to check it out and advise you....................its free
Spartan- Moderator
- Posts : 44
Join date : 2009-04-30
Location : UK
Re: My 1990 318is is knocking at the back
LOL!! i might just do that.
are the mounts a cheap fix? are they easy to replace. i have axle stands and a jack is it possible to do without a ramp
are the mounts a cheap fix? are they easy to replace. i have axle stands and a jack is it possible to do without a ramp
slinky- Moderator
- Posts : 135
Join date : 2009-04-30
Re: My 1990 318is is knocking at the back
pretty easy mate but if you just get the bushes without the carriers then you will need a press to remove and install them
Spartan- Moderator
- Posts : 44
Join date : 2009-04-30
Location : UK
Re: My 1990 318is is knocking at the back
not to expensive...
see here... http://www.realoem.com/bmw/partgrp.do?model=HD51&mospid=47375&hg=33&fg=10
unfortunatley i cant find diagrams for the e30 but the 5 series e34 is very similar... if you dont feel confident, a garage should'nt charge too much to replace them...
hope this helps...
see here... http://www.realoem.com/bmw/partgrp.do?model=HD51&mospid=47375&hg=33&fg=10
unfortunatley i cant find diagrams for the e30 but the 5 series e34 is very similar... if you dont feel confident, a garage should'nt charge too much to replace them...
hope this helps...
Re: My 1990 318is is knocking at the back
tock my car to ats today. it is a mount bush. its gone hard and brittle.
but ats said they cant do the work because it is a specialist job!
fools. i think i can do that myself.
thx for your help!!
but ats said they cant do the work because it is a specialist job!
fools. i think i can do that myself.
thx for your help!!
slinky- Moderator
- Posts : 135
Join date : 2009-04-30
Re: My 1990 318is is knocking at the back
Ive had the work done at my local garage, theres no way i could fit the time in to do the work.
But its fine now. thats one less problem to tick off the list that is now growing.
thx. slinky
But its fine now. thats one less problem to tick off the list that is now growing.
thx. slinky
slinky- Moderator
- Posts : 135
Join date : 2009-04-30
e30
hey everyone im brand new to this forum so couldnt help with that last problem. any other issues anyone has dnt hesitate to ask and check out the e30 website
Similar topics
» e36 coupe knocking noise
» 1995 3 series 1.6i rear end knocking
» 3 Series 318is E36 model 1999 Bonnet release cable renewal
» Oil, back to basics
» BMW E36 Compact magnex stainless steel cat back system
» 1995 3 series 1.6i rear end knocking
» 3 Series 318is E36 model 1999 Bonnet release cable renewal
» Oil, back to basics
» BMW E36 Compact magnex stainless steel cat back system
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Tue Oct 21, 2014 1:35 am by carebmw
» sharing IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine
Fri Jul 11, 2014 9:52 pm by vvdibmw
» Tuirel S777 Retail DIY Professional Hand-held Auto Scanner With Full Softwares
Tue Jun 03, 2014 2:55 am by vvdibmw
» What you should know about brake maintenance?
Thu May 08, 2014 3:15 am by vvdibmw
» e36 coupe front windows "bouncing"
Tue Mar 11, 2014 7:52 pm by hogpie
» FS: BMW Automatic Transmission - ZF 5HP24 - 2000 BMW X5 E53 4.4i - $1750 OBO
Mon Mar 03, 2014 8:37 pm by vvdibmw
» Lastest, Comprehensive BMW Multi tool V3.5 BMW Multi-Tool latest software V3.5 Powerful than AK300! [IMG]http://www.uobd2.com/upload/review/bmw-multi-tool-software_2012041583176601.jpg[/IMG] support there type of protocol:KWP-CAN BUS 100Kbps, KWP-CAN BU
Mon Mar 03, 2014 8:32 pm by vvdibmw
» How to make BMW Auto Key Programmer
Thu Feb 27, 2014 1:37 am by vvdibmw
» Bootlid gas struts
Tue Dec 31, 2013 1:01 am by vvdibmw